The Solar Stik - The New Generator

Recreation	Emergency	Marine	Humanitarian	Military

"Solution" Appliances

Packages & Accessories

STIK™ INTERACTIVE

SOLAR STIK™ INC.

The Portable Remote Operation Inverter/Charger

(P.R.O. Verter™) 1250MS

ITEM # 000704

NEW for 2010 -

The PRO-Verter™ comes with a new Heavy Duty Carrying Strap

The new strap allows for easy transport when removed from its rugged Pelican™ Case

OPERATION

The PRO-Verter™ 1250MS & Power Pak configured as a UPS inside an

Emergency Mobile Command Center

The PRO-Verter™ 1250MS connected to a 120VAC wall outlet

The PRO-Verter™ connected between the Solar Stik™ and a

fuel-driven power generator

PRO-VERTER™ 1250MS OVERVIEW

The PRO-Verter™ 1250MS is a powerful solution that manages

three situations:

1. Solar Stik™ System is used where an existing AC power supply is intermittently available (such as an inconsistent power grid or fuel-driven generator)

2. The reduction of fuel-driven generator "run-time" is necessary, either due to the lack of fuel or to lessen the cost burden of operating the generator

3. The Solar Stik™ System is used where power requirements may exceed the System's daily power generation, requiring the use of a supplemental power source such as a traditional fuel-driven generator.

The PRO-Verter™ is an ideal solution for applications where the power grid is prone to frequent outages, a fuel-driven generator is available, and/or the Solar Stik™ cannot independently meet the daily power generation requirement. The PRO-Verter™ can also be used to reduce the "run-time" of a fuel-driven generator (either due to the lack of fuel or to lessen the operational cost burden).

The PRO-Verter™ serves as the connection point for all appliance loads in a Solar Stik™ System, and manages all available sources of power (solar/wind, grid, or fuel-driven generator) as a Micro-grid configuration.

The Power Ratings

Any PRO-Verter™ is rated at "Maximum Watts", or the maximum value of the power it can process at one time. The “maximum” value is a sum total of the power processed when both INVERTER and CHARGING functions are simultaneously operating at their full capability. The PRO-Verter™ 1250MS can process 1440 Watts at its maximum.

The Inverter & The Charger – Principles of Operation

The PRO-Verter™ features an inverter that functions in two modes:

1. “Inverter” Mode - takes power exclusively from the battery and inverts it to AC power for the connected load.

2. “Bypass” Mode - When AC power is available (from the power grid or fuel-driven power generator), it will pass the available AC power through to an appliance.

If providing power to AC appliances in “Bypass” mode, it will instantly switch itself into "Inverter" mode upon the loss of utility or generator supplied AC Power, drawing power from a connected Power Pak or battery. This function ensures a continuous, uninterrupted flow of power to the appliance loads, similar to the function of an Uninterrupted Power Supply (U.P.S.).

The PRO-Verter™ also features a high-output battery charger that functions only when the inverter is in Bypass mode. When in Bypass, the Charger converts some of the incoming AC power into DC power and then stores it in Solar Stik™ Power Paks (charging the Pak’s batteries).

The rate at which the PRO-Verter™ can recharge a battery is based on the amount of power the PRO-Verter™ can process at one time (1440 Watts). The PRO-Verter™ automatically adjusts the charge rate to favor the AC load, ensuring that it remains in operation. The maximum charging rate of 30 Amps can only occur if there is enough power available after the load requirement is met.

The PRO-Verter™ provides "Plug & Play" operation with any Power Pak or Expander Pak, and it is also available in any power model

(230VAC/50HZ or 120VAC/60HZ)

FEATURES

Compact, table-top design (small footprint)

Soft rubber feet allow for safe placement on tables,
counter-tops, & more

“Plug & Play” operation with any Power Pak or Expander Pak using Post Connections (shown below)

Automatic operation with easy to use LED display and controls

Combination 1250 Watt inverter (non-sinusoidal/twin outlet) and three-stage 30 Amp 12 or 24 Volt charger with automatic line-to-battery transfer

(16.6 millisecond)

1250 watts continuous AC output in inverter mode, 1440 watts continuous AC output in AC mode. Two built-in NEMA output receptacles pass 120VAC or 230VAC line power or inverter output through to connected equipment

Works with any combination of Power Pak and/or Expander Pak. Solar Stik™ connection to the Power Pak will ensure that all available methods of storing power are employed. Solar Stik™ connection is recommended, but not required

Programmable controls - "Charge Only" or "Charge/Auto-Invert" modes

Tactical design of the system allows for rapid deployment, and its ruggedness makes it ideal for third-world countries or harsh environments

5’ connection cable with color-coded cable ends for connection to any Power Pak Terminal Posts

The PRO-Verter™ 1250MS is transported in a legendary

Pelican™ 1550 Case, making transport & storage easy and safe

Ideal for areas where the power grid is unreliable or prone to frequent outages or the Solar Stik™ cannot store the full power required to meet the daily power demand

PELICAN ™ PROTECTIVE CASE